Maytag is one of the oldest appliance manufacturer brands in the United States, and this makes them one of the most used brands in every American’s home. Their dishwashers, especially, are very well known for their large capacities, making them a fan favorite.
That being said, no matter how popular or well-built an appliance is, it will tend to malfunction every once in a while, and that is completely fine. Because in most cases, all you have to do is reset the control panel, and it will be back to normal.
And while it might seem like a regular job for most people, there are a lot of new users to Maytag or to a dishwasher, in general, who might not know how to reset the control panel on a Maytag dishwasher. And this little guide is for them! So keep on reading if you wish to reset your dishwasher.
The Process Of Resetting The Control Panel On Maytag Dishwasher
Disconnect
The first thing you need to do is disconnect the dishwasher from the outlet. You have to wait for a minute before you can plug it in again. In the case that your dishwasher has been hard wired, you will need to turn off the breaker for a minute instead, before turning it on again.
Reconnect
After one minute has passed, reconnect the plug or turn the breaker on again. This will complete the resetting process, and voila you are done!
The Control Lock
It might be the case, that resetting the dishwasher using the top steps did not work for you, and you still don’t see any lights or have any power in your dishwasher. This could be the case if your Control Lock has been turned on. And if this is the case, then your control lock will not work at all.
What Is The Control Lock?
The control lock is a lock placed on the control panel so that it is not misused. This is especially used for homes where there are kids. With the control lock turned on, the control panel will not work.
Setting The Control Lock
To enable the control lock, you have to press the dedicated button. You will know it has been activated if you see the control lock light flash thrice.
To disable the control lock, press the key which states “Control Lock” for 3 seconds.
Conclusion
Very similar to a computer, oftentimes, a dishwasher’s problems can also be solved by something as simple as resetting it. This is one of the first things you can do to check if the dishwasher is working normally again or not before you get a further checkup. However, in most cases, this does do the trick!
In either case, if you want to know how to reset the control panel on a Maytag dishwasher, you have come to the right place. One skim through the simple instructions should help you along.
Leave a Reply