In today’s world, a dishwasher isn’t a mere luxury but a necessity. After a day of hustling, none wants to spend a significant portion of their finite free time by glistening dishes. That’s when a dishwasher comes in handy.
It doesn’t matter whether you need to wash a couple of plates or a load of dishes, with a dishwasher by your side, you can accomplish the task in a breeze.
Nevertheless, the setting up process of a dishwasher becomes a drag if the sewer system is away from the place where you want to place the machine.
What can help you in this case? A long hose. But what if the hose that comes with your dishwasher is short? Well, fortunately, you can extend that. In this article, we’ll tell you step by step method of how to lengthen dishwasher drain hose. So, if you’d like to know, bear with us, please.
How To Extend A Dishwasher Drain Hose
Extending the dishwasher drain hose is no rocket science. You can do it yourself if you methodically follow some tips and tricks. Those are given below:
Step 1: Gauge Out The Actual Length Of The Drain Pipe
If you don’t know the measurement of the outer diameter of your drainpipe, first thing first, measure it. It’ll help you to determine how long the extension should be.
To do that, start from one edge of the piper through its center. After that, proceed to its outside edge. Now, you need to purchase a hose of the exact length and a flexible drain covering.
Step 2: Shut Off The Power
While dealing with any electronic device, you should always turn it off before starting to work. It reduces the chance of getting electrocuted. So, unplug your dishwasher from the power outlet.
Step 3: Loosen Up The Hose
Now, you need to track down the endpoint of your drain hose that’s connected beneath the sink. Different kitchen has a different place of setting for that.
On locating the end, release the hose clamp. You can easily do this with the help of a screwdriver.
Note: Place the screws in a secure place. If you lose these tiny monsters, you’re going to be in a trouble.
Step 4: Connect The Coupling
You need to adjoin the extension and the old drain hose by using a drain coupling. Keep the coupling over a piece of drainpipe at one side. You should lookout for a notch that can be found inside. It limits the placement of the pipe.
Tighten the hose clamp and lock it with a waterproof and leakproof seal. For that, you’ve got to insert the extension into the opposite to the coupling. Continue this until the extension reaches the halfway point. Finally, tighten the clamp.
Step 5: Turn On The Dishwasher
If everything is done properly, at this point, you can reconnect the hose. Attach it below the sink where it was before and cover it properly.
Now, it’s time to check if everything has been done properly. Move back the dishwasher to its allocated place and turn it on. Run a test by washing one or two dishes to see if it’s functioning as usual. There must not be any leakage. If all goes all, congratulations! You’ve done it.
Nevertheless, if it leaks, turn back to step 4 again and tighten up the hose properly.
How To Clean A Dishwasher Drain Hose
It’s nothing unusual for a dishwasher drain hose to get clogged. But you can clean it easily and get the flow to be like before very easily. The steps are given below:
- Make sure the dishwasher is empty.
- Turn it off.
- Using a towel, bring out the stuck water.
- Inspect your drain hose.
- Unfasten it and then wash it properly.
- Look at the dishwasher drain. If there’s no stagnant water or buildup, you’re good to go.
Frequently Asked Questions
Can You Extend A Dishwasher Drain Hose?
Yes, you can extend a dishwasher drain hose. For that, at first, you need to determine how long the existing hose is and what length of an extension you’ll be needing.
After purchasing that, you’ll need to follow some simple steps and you’re good to go.
If A Dishwasher Drain Hose Is Too Long, Can That Cause A Problem?
Yes, it can. Excessively long hoses increase the risk of kinking. Kinking or leakage impedes drainage. As a result, a backlog of water is created in the hose.
Should You Change Dishwasher Hose?
You should change your dishwasher hose every 5 years even if there’s no problem with it. It’s better to opt for a braided and reinforced steel hose. They last for a long term and serves you without any leakage.
Can You Use Teflon Tape On A Dishwasher Hose?
Teflon tape is not really needed when you’re making an extension. If you’re working with tapered pipe threads, Teflon tape will help in filling in between the threads. Otherwise, Teflon tape isn’t needed. Rather, it may make a mess.
Is It A Must To Place A Dishwasher Next To The Sink?
Even though that’s desirable, it’s not mandatory to place a dishwasher right next to your sink. By placing a dishwasher next to the sink, you’re making sure that you can do everything in a breeze. Nevertheless, if you can’t do that, there’s nothing to worry about. If the hose isn’t long enough, you can always extend it without much exertion.
Final Words
A dishwasher can make your life easier. But if its placement isn’t correct, you may have to put in some extra effort. But it won’t make you sweat much since elongating a dishwasher hose is a relatively easy task.
Just measure out everything well and after you’re done with all the steps, tighten the screws securely. This should do the deed. We hope this article could help you learn how to lengthen dishwasher drain hose.
Leave a Reply