Experiencing squeaky noises on a dishwasher door is pretty common once you have used that dishwasher for a good while. It is not something that should alarm or worry you in any case but is definitely something you should get fixed.
Because the squeaky door means there is something wrong with the door, which can escalate to cause bigger issues such as a faulty door. So if you have noticed it, check it out, and get it fixed!
If you are wondering the way to do that, check out this detailed piece on how to fix a squeaky door on a dishwasher to follow up on why it happens, and what you can do to prevent it from happening in the future.
What Causes A Squeaky Door On A Dishwasher
There are some parts on the dishwasher which cause the squeaky noise, and these are mostly the same parts regardless of what dishwasher you use. These parts include the hinges, nylon ropes, springs, rollers, bearings, balance link cable, etc.
The reason behind needing to know what’s exactly causing the noise is because you need to pinpoint where it is coming from to be able to take better action against it. This way you know exactly what you need to lubricate, instead of wasting time and lubricants by applying it everywhere.
What You Can Do To Fix A Squeaky Door On A Dishwasher
In order to fix the squeaky door, there are certain things you can do. Below you will find multiple ways in which you can fix the issue at hand. But do note, that the source of all these are different, which means, some may and others may not work for you.
Since there are various reasons why we can get these noises from a dishwasher, we have provided all the possible solutions. Try them out to get rid of the problem, because you would need to do these for maintenance and good health of the dishwasher either way!
Clean
Cleaning the dishwasher is the primary step. This allows you to get rid of a lot of greases which can cause the squeaky door. The grease causes friction between the spring and cable, and this in turn causes the noise. Get rid of that, and your problem is solved.
For this reason, you need to use a degreaser. A degreaser will ensure that there is absolutely no oil or grease left and that the entire dishwasher is spotless.
Also, make sure to clean the entire inside of the dishwasher with dishwasher detergent. Oftentimes you have food particles and residue stuck on bearings and other parts which can cause the squeaky noise as well.
Lubricate
This is something most of us know and probably expected. If something causes a squeaky noise, chances are it needs lubrication. The same applies to the dishwasher as well.
After you are done with the cleaning, start the lubrication process. A common one used by most people is the WD-40 which is effective and useful. However, you may pick any other preferred lubricant as well.
In order to lubricate the door, you will have to turn the power to the dishwasher off, as you will need to open some things up, so this is done for safety.
After turning the power off, open and close the door to carefully check where the sound is coming from. Then take out all the screws and pull the plate off. Lower the door so that it is placed in a horizontal position. This allows you to apply the lubricant easily.
Now move on with the lubricant, apply or spray it, whatever method it follows. After you have applied the lubricant, move the door up and down so that the lubricant can pass through and reach every inch of the hinges.
Attach the screws back on and go back to using it. By now the squeaky sounds on the door should have vanished.
Tighten Screws
Screws and bolts can come loose after a good while of using and can be the reason why you get the squeaky door. So take a moment to check all the hinges, and tighten any screws that have come loose over time.
Level
Sometimes, when we place the dishwasher, there might be something stuck underneath it, causing it to tilt. When the dishwasher is not leveled, it can cause squeaky noise as well. So use a level to check that you have placed the dishwasher perfectly horizontally.
Rubber Gasket
The rubber gasket around the dishwasher door can get worn out over time. If that is the case, it can be why you hear noises when opening and closing the dishwasher door, as the worn-out rubber gasket is not allowing the door to close properly. Replacing it can get rid of the noise.
Repair
If all the other methods do not work, then you will most likely have to get the door repaired. And this refers to the cable, which will need to be changed.
Once you have gotten the cable changed, make sure to apply a generous amount of soap on it, and rub it on the cable. After applying the soap, open and close the door a few times to ensure that the soap has reached all sides of the cable.
Conclusion
Fixing the noise on a dishwasher door is really not that hard. All you need are some simple tips and tricks, all of which have been provided above. While one of these might work for you, it might not for someone else. This simply means their problems lie in some other part.
This is why it is good to check all the tips, check where your problem lies, and still follow rules such as lubricating, degreasing, and cleaning so that you don’t face this issue in the future.
We hope this has helped you understand how to fix a squeaky door on a dishwasher. And it will surely help you maintain the dishwasher well too!
Leave a Reply