party pumps are simple devices that consist of a handle, a pump, and a spout. To use a party pump, the user simply inserts the spout into the hole in the top of the keg and pumps the handle up and down. This action forces beer up through the spout and into the cup or container of the user.
Party pumps are an easy and effective way to serve beer from a keg, and can be found at most party supply stores.
Why Party Pump Keg Tap Is Necessary?
A keg tap is necessary to dispense beer from a keg. Without a tap, the beer would not be able to flow out of the keg. The party pump is a type of keg tap that is commonly used for picnics and parties. It is easy to use and does not require any ice or refrigeration.
Our Top Picks For Best Party Pump Keg Tap
Best Party Pump Keg Tap Guidance
MRbrew Keg Party Pump, American D System Beer Keg Tap Party Pump, 4 Inch Picnic Pump with Black Beer Faucet & Beer Hose, Chrome-Plated Keg Draft Beer Party Pump with 2 Hose Clamps
Looking for an easy way to dispense beer at your next party or picnic? The MRbrew Keg Party Pump is your perfect solution! This pump is simple to use, requiring no power, no gas cylinder, and no regulator – just place your keg in a bucket of ice and pump the beer out by the piston rod handle. The durable, fully lubricated gas spring washer in the pump keeps the air pressure smooth, so you can enjoy a constantly flowing supply of cold beer. The included hose clamp ensures there are no leaks at the connection end. The MRbrew Keg Party Pump is also rock-solid, with a heavy-duty chrome-plated finish that is easy to clean and resists rust. It works well for all USA domestic beer kegs, including Budweiser, Miller, Coors, Molson, Busch, and Sam Adams. So go ahead and add some extra FUN to your next party or picnic with the MRbrew Keg Party Pump!
Common Questions on MRbrew Keg Party Pump, American D System Beer Keg Tap Party Pump, 4 Inch Picnic Pump with Black Beer Faucet & Beer Hose, Chrome-Plated Keg Draft Beer Party Pump with 2 Hose Clamps
• How do I install the keg party pump?First, remove the dust cover and washer from the party pump. Next, screw the party pump onto the keg. Finally, screw the pressure release valve onto the top of the party pump.
• How do I use the keg party pump?
First, make sure that the keg is properly pressurized. Next, open the valve on the party pump. Finally, dispense the beer by pressing the lever on the party pump.
• How do I clean the keg party pump?
First, unscrew the party pump from the keg. Next, disconnect the pressure release valve from the party pump. Finally, rinse the party pump with warm water.
Why We Like This
• 1. American D System Beer Keg Tap Party Pump• 2. 4 Inch Picnic Pump with Black Beer Faucet & Beer Hose• 3. Chrome Plated Keg Draft Beer Party Pump with 2 Hose Clamps• 4. Heavy duty construction for long lasting use• 5. Easy to operate no power or gas needed
Additional Product Information
| Color | Silver |
FERRODAY 8″ Keg Pump D-System Keg Pump Complete US Beer Keg Pump for Sankey Keg Party Pump Heavy Duty Picnic Keg Tap Keg Hand Pump Draft Beer Kegerator Pump Easy Lock Water Keg Pump Soda Pump
Looking for a top quality keg pump that will provide years of reliable service? Look no further than the FERRODAY 8″ Keg Pump! This pump is built to last with high-quality materials and solid construction. The picnic faucet has been tested thousands of times and is guaranteed not to leak. The pump features a lever handle lock coupler with an internal gasket for an air-tight seal, and is specially designed for easy keg tapping. The pump also has premium O-rings on all connections for added durability. The FERRODAY 8″ Keg Pump is the perfect choice for home or commercial use. It’s easy to operate with a simple stroke pump, and the durable lever style handles make dispensing effortless. Add more fun to your parties with this great keg pump!
Common Questions on FERRODAY 8″ Keg Pump D-System Keg Pump Complete US Beer Keg Pump for Sankey Keg Party Pump Heavy Duty Picnic Keg Tap Keg Hand Pump Draft Beer Kegerator Pump Easy Lock Water Keg Pump Soda Pump
• What is the max psi for this pump?This pump has a max psi of 60.
• What is the warranty on this product?
This product has a 1 year warranty.
• How long is the pump?
This pump is 8″ long.
• What is the max flow rate for this pump?
This pump has a max flow rate of 7 gallons per minute.
• What is the material of this pump?
This pump is made of stainless steel.
Why We Like This
• 1. American complete pump tap system• 2. 8” D system coupler for Sankey keg• 3. High quality material, classic modeling, and solid construction• 4. Lever handle lock coupler with internal gasket• 5. Specially designed for easy keg tapping
Additional Product Information
| Color | Silver |
| Length | 8 Inches |
PERA Keg Party Pump D System 4 Inch Beer Keg Tap Party Pump with Extra Picnic Tap for Homebrewing
PERA keg party pumps are the perfect way to dispense homebrewed beer at your next party. The D system coupler end fits most American kegs, while the included plastic hose and picnic tap make it easy to pour. The pump is made of stainless steel with a durable hard nickel-plating, making it both sturdy and stylish. So get pumping and enjoy your homebrewed beer at your next party!
Common Questions on PERA Keg Party Pump D System 4 Inch Beer Keg Tap Party Pump with Extra Picnic Tap for Homebrewing
• What is the dimensions of this party pump?The party pump is four inches in diameter.
• What is the maximum flow rate of this pump?
This pump has a flow rate of up to two liters per minute.
• What is the average on-time for this pump?
This pump has an average on-time of 50 minutes.
• What is the maximum working pressure for this pump?
This pump has a maximum working pressure of 60 psi.
Why We Like This
• Durable, hard nickel plating on stainless steel body for long lasting use• Connects to most American beer kegs for easy pouring• Comes with two extra picnic taps and a plastic hose for easy dispensing• quality guaranteed with money back or replacement policy• sturdy and easy to use
Additional Product Information
| Color | Silver |
LUCKEG Draft Beer Party Pump Air Party Pump Keg Picnic Pump with Picnic Tap 4 inch US Sankey D System Beer Keg Tap and Lever Handle for American Beer Brewing Equipment System
LUCKEG Draft Beer Party Pump is a sturdy, easy-to-use keg pump that is perfect for picnics, parties, weddings, and other events. This pump requires no power, gas cylinder, or regulator, and can be easily placed in a bucket of ice to keep your beer cold. The chrome-plated party pump is durable and easy to clean, making it a great choice for your next event.
Common Questions on LUCKEG Draft Beer Party Pump Air Party Pump Keg Picnic Pump with Picnic Tap 4 inch US Sankey D System Beer Keg Tap and Lever Handle for American Beer Brewing Equipment System
• Where can I find this product?This product is available on Amazon.
• What are the dimensions of this product?
This product is 4 inches in diameter.
• What is the maximum psi for this product?
60 psi
• What is the tap system for this product?
US Sankey D System
Why We Like This
• No power required• Heavy duty and rust resistant• Easy to clean and maintain• Perfect for parties and events• Quality guaranteed
PERA Beer Keg Tap Party Pump American D System 8 Inch Stainless Steel Beer Party Pump
If you’re looking for an easy and efficient way to dispense your favorite beer, then look no further than the PERA Beer Keg Tap Party Pump. This high-quality party pump is made of durable stainless steel with a hard nickel-plating, and it comes with two extra Picnic taps for your convenience. Just attach the D-system coupler end to your keg, give it a few pumps, and pour through the included plastic hose and Picnic Tap. The D Keg Party Pump is compatible with most American Beer Kegs, so you can enjoy your favorite brews with ease. Plus, we offer a quality guarantee so you can buy with confidence.
Common Questions on PERA Beer Keg Tap Party Pump American D System 8 Inch Stainless Steel Beer Party Pump
• What is the name of the company that makes this product?The company that makes this product is called PERA.
• What is the product made of?
This product is made of stainless steel.
• What is the product used for?
This product is used for tapping kegs of beer.
• How does the product work?
This product works by using a lever to pump air into the keg, thus dispensing the beer.
• What are the dimensions of the product?
This product is 8 inches long.
Why We Like This
• Made of stainless steel with a durable hard nickel plating for long lasting use• Connects to most American beer kegs for easy use• Pumps and pours beer through the included plastic hose and picnic tap• Quality guaranteed with a money back or replacement policy• 8 inch size is perfect for party use
Benefits of Party Pump Keg Tap
Enjoying a draught beer at home is now easier than ever, thanks to the best party pump keg taps. These devices allow you to tap into any beverage dispenser and pour yourself a cold one – no need for expensive kegs or complicated taps. Simply attach the tap to your party pump and start serving!
There are many benefits of using a party pump keg tap. First, it’s much more economical than buying beverages in cans or bottles. You’ll save money every time you use your tap, since there are no associated costs like deposits or packaging materials. Second, pumps keep your beer fresher for longer – up to 30 days! This means you can enjoy draught beer anytime without having to worry about it going bad quickly. Finally, pumps are easy to use and clean – simply rinse with hot water after each use.
Buying Guide for Best Party Pump Keg Tap
When choosing a party pump keg tap, there are several things to consider in order to get the best possible tool for your needs. If you’re considering using one of these taps for your next party, here is a guide to help you choose the best party pump keg tap:
1. Determine what size tap you will need. The most common sizes are 1/4″ and 3/8″, but there are other sizes available as well. If you’re not sure which size to get, it’s always best to err on the side of caution and get a larger size so that it will fit all of your kegs.
2. Choose a tap that is easy to use. Some taps can be difficult to operate, so it’s important to choose one that is easy to use. Make sure that the Tap has clear instructions so that you can easily follow them.
3. Consider getting atap with an automatic shut-off feature. This feature will prevent over-pumping, which can damage the keg or cause foaminess in your beer.
4.’ Consider getting aTap with more than one spout. This way, you can dispense multiple beers at the same time without having to remove and reinsert the Tap each time.’
5.’ Get a good seal for yourTap by choosing one with O-rings or some other type of sealant.’ This will prevent leaks and ensure that your beer stays fresh.’
6.’ Check out different brands before making your final decision. There are many different brands available, so take some time to research them before deciding which one is right for you.’
Frequently Asked Question
How do I choose the best party pump keg tap for my needs?
There is no one definitive answer to this question. Different people have different opinions, and you should ultimately choose the party pump keg tap that you think will work best for you and your needs. Some factors you may want to consider include the size and capacity of the tap, the type of beer you’ll be serving, and how often you’ll be using the tap. Do some research and then make a decision based on your specific needs and preferences.
What are the different types of party pump keg taps available?
There are many different types of party pump keg taps available. Some common types include: -Standard party pump keg taps: These are the most common type of party pump keg taps. They typically have a lever or knob that is turned to open and close the tap, and a spout that is used to dispense the beer. -Party pump keg taps with a built-in CO2 cartridge: These types of party pump keg taps have a small CO2 cartridge that is used to carbonate the beer. This is a convenient option if you do not have access to a CO2 tank. -Party pump keg taps with a detachable hose: These types of party pump keg taps have a hose that can be detached from the tap. This is convenient if you need to move the tap around or if you want to use the tap with multiple kegs.
Which party pump keg tap is the most durable?
Some party pump keg taps are made from more durable materials than others, so it is important to do your research before purchasing one.
What is the best way to clean a party pump keg tap?
The best way to clean a party pump keg tap is to disassemble it and clean all of the parts with hot water and soap. Be sure to rinse all of the parts well to remove any soap residue.
How do I store a party pump keg tap when not in use?
The best way to store a party pump keg tap is to keep it in a cool, dry place. If you are not using it for a long period of time, it is best to store it in a fridge or freezer.
Conclusion
This party keg tap is the best because it is easy to use and keeps your beer fresh. It also has a guide so you can pour the perfect pint every time.
Leave a Reply