There are a few different types of galaxy’s edge lightsaber wall mounts to choose from. The first type is the standard mount, which is attached to the wall with screws. The second type is the magnetic mount, which uses magnets to hold the lightsaber in place. The third type is the suction cup mount, which uses a suction cup to attach the lightsaber to the wall.
The standard mount is the most popular option because it is the most affordable and it is very easy to install. The main drawback of this type of mount is that it can be difficult to remove the lightsaber if you ever need to do so.
The magnetic mount is a great option if you want an easy way to remove and reattach your lightsaber. However, this type of mount can be more expensive than the standard mount.
The suction cup mount is the most expensive option but it is also the most secure. This type of mount will keep your lightsaber in place even if there are bumps or other movement in the room.
Why Galaxy’s Edge Lightsaber Wall Mount Is Necessary?
Your best galaxy’s edge lightsaber should be mounted on the wall for two main reasons. First, it will make a great conversation piece and second, it will protect your investment. If you have a high-end lightsaber, you don’t want it sitting on a shelf where it can get scratched or dented. By mounting it on the wall, you can be sure that it will stay in pristine condition.
Our Top Picks For Best Galaxy’s Edge Lightsaber Wall Mount
Best Galaxy’s Edge Lightsaber Wall Mount Guidance
Lenink 2 Pack Lightsaber Wall Mount, Lightsaber Holder Rack Compatible with Galaxy’s Edge Lightsabers and Most Lightsaber (Black)
Lightsaber wall mounts are the perfect way to display your lightsaber without hiding any of the details. They are made of durable ABS material and are 3D printed and reinforced to withstand the weight of any hilt. The vertical wall mount is suitable for most lightsabers, such as Kylo Ren Force FX lightsabers, Savi’s lightsabers, Darth Revan Lightsaber, Darth Vader sabers, and more. However, please measure your lightsaber before purchase to ensure compatibility. The installation is easy, just use a Phillips screwdriver to screw the anchor into your wall until it is flush with the drywall. Then mount the slide plate and wall clip into the wall and slide the holder into the slider. Finally, put your lightsaber in and clip it. The complete wall mount kit comes with 6 screws, 6 anchors, 2 wall clips, 2 slide plates, 2 holders, and everything else you need for installation.
Common Questions on Lenink 2 Pack Lightsaber Wall Mount, Lightsaber Holder Rack Compatible with Galaxy’s Edge Lightsabers and Most Lightsaber (Black)
• What is the weight of the product?3.2 ounces
• What is the dimensions of the product?
1.57 x 0.79 x 5.91 inches
• What is the price of the product?
$25.99
Why We Like This
• 1. Perfect Display: Lightsaber wall mount allows you to display lightsaber perfectly without hiding details, making your lightsaber looks beautiful and great when lights up.• 2. Premium Material: The lightsaber holder is made of durable ABS Material which is 3D printed and reinforced, so it can withstand the weight of any hilt.• 3. Compatibility: For 1″ standard blade, and less than 22″ wide hilt, the vertical wall mount is suitable for most lightsaber such as Kylo Ren Force FX lightsabers, Savi’s lightsabers, Darth Revan Lightsaber, Darth Vader sabers and more Note: Not suitable for all Galaxy’s Edge lightsabers, please measure your lightsaber before purchase for correct fitment.• 4. Easy to Use: Use a phillips to screw the anchor into your wall until it’s flush with the drywall Mount the slide plate and wall clip into the wall Slide the holder into the slider and finally put your lightsaber in and clip it.• 5. Complete Wall Mount Kit: 6 Screws, 6 Anchors, 2 Wall Clips, 2 Slide Plates, 2 Holders, This lightsaber mount for wall with complete hardware kit allows you to install it without other tools.
Lenink 2 Pack Clear Lightsaber Wall Mount, Lightsaber Holder Rack Compatible with Galaxy’s Edge Lightsabers, Darth Revan Lightsaber, Darth Vader Sabers and Most Lightsaber
Lightsaber wall mounts are the perfect way to display your sabers without hiding any details. They are also great for sabers that light up, as the clear material ensures that your blade will be visible. These mounts are made from durable clear ABS material, which can withstand the weight of any hilt. They are also 3D printed and reinforced for extra strength. The mounts are compatible with any 1″ standard blade, and are suitable for any lightsaber up to 22″ in length. This includes Kylo Ren Force FX lightsabers, Galaxy’s Edge lightsabers, Savi’s lightsabers, and more. The mounts come with all the necessary hardware for installation, and can be easily mounted on any wall without the need for additional tools.
Common Questions on Lenink 2 Pack Clear Lightsaber Wall Mount, Lightsaber Holder Rack Compatible with Galaxy’s Edge Lightsabers, Darth Revan Lightsaber, Darth Vader Sabers and Most Lightsaber
• What is the dimensions of the Lenink 2 Pack Clear Lightsaber Wall Mount?The dimensions of the Lenink 2 Pack Clear Lightsaber Wall Mount are 3.54″ x 1.57″ x 1.57″.
• What is the weight of the Lenink 2 Pack Clear Lightsaber Wall Mount?
The weight of the Lenink 2 Pack Clear Lightsaber Wall Mount is 0.11 pounds.
• How many lightsaber can the Lenink 2 Pack Clear Lightsaber Wall Mount hold?
The Lenink 2 Pack Clear Lightsaber Wall Mount can hold two lightsabers.
Why We Like This
• 1. Perfect Display• 2. Premium Material• 3. Compatibility• 4. Easy to Use• 5. Complete Wall Mount Kit
I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount
The I3DP Rancor Tooth Galaxy’s Edge Lightsaber Wall Mount is a great way to show off your Lightsaber collection! This mount is designed to fit most Lightsaber hilts and can be mounted to any wall. The Rancor Tooth is a great way to add some Lightsaber flair to your home or office, and is the perfect way to display your Lightsabers!
Common Questions on I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount
• Where is the I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount made?The I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount is made in the United States of America.
• How long does it take to make the I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount?
It takes approximately 2 hours to make the I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount.
• What are the dimensions of the I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount?
The I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount is 6.5″ x 4.5″ x 2.5″.
• How much does the I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount weigh?
The I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount weighs 1 lb.
• What is the I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount made of?
The I3DP Rancor Tooth Galaxys Edge Lightsaber Wall Mount is
Why We Like This
1. Officially licensed by Lucasfilm
2. 3D printed using state of the art technology
3. Perfect for displaying your Lightsaber
4. Holds up to two Lightsabers
5. Easy to install
CUSTOM Lightsaber Wall Mount for a Any Lightsaber
Looking for a way to display your Lightsaber that shows it off as the impressive weapon it is, but can’t find anything that’s quite right? Check out this custom wall mount that’s perfect for any Lightsaber!
This mount is designed to fit all Lightsabers except for the Kylo Ren Saber. If you need a mount for your Kylo Ren Saber, I have a special Kylo Ren Saber mount available. This mount also fits Sabers from Galaxy’s Edge with flat bottoms. If your Saber has the tooth pommel or the 2 prong pommel, I have custom mounts for those too.
This mount comes with everything you need to attach it to your wall. It’s easy to install and makes a great addition to any room. Whether you’re showing off your Lightsaber to friends and family or just want to admire it yourself, this is the perfect way to do it!
Common Questions on CUSTOM Lightsaber Wall Mount for a Any Lightsaber
• What is a CUSTOM Lightsaber Wall Mount?A CUSTOM Lightsaber Wall Mount is a device used to mount a lightsaber on a wall.
• What are the benefits of using a CUSTOM Lightsaber Wall Mount?
There are many benefits of using a CUSTOM Lightsaber Wall Mount, including the ability to display your lightsaber prominently and the fact that it can be used as a practical way to store your lightsaber when not in use.
• How do I install a CUSTOM Lightsaber Wall Mount?
Installation is simple and only takes a few minutes. First, use the provided template to mark the four holes where the screws will go. Next, pre-drill the holes and then screw in the mounting screws. Finally, attach the saber hilt to the mount using the provided set screw.
Why We Like This
• 1) Fits all lightsabers except the Kylo Ren Saber• 2) Fits Sabers from Galaxy’s Edge with flat bottoms• 3) Comes with all equipment to mount on a wall• 4) 5)
I3DP Protection and Defense 2 Prong Galaxys Edge Lightsaber Wall Mount
The I3DP Protection and Defense 2 Prong Galaxys Edge Lightsaber Wall Mount is the perfect way to show off your protection and defense lightsaber from Savi’s workshop. This mount is custom made to fit the 2 prong pommel from Glalaxys edge and includes all the hardware needed to mount it on the wall. Made in the USA by Infinity 3D Prints, the original creator of the 3D printed lightsaber wall mount, this mount is sure to impress.
Common Questions on I3DP Protection and Defense 2 Prong Galaxys Edge Lightsaber Wall Mount
• What is the I3DP Protection and Defense 2 Prong Galaxys Edge Lightsaber Wall Mount?It is a wall mount for your lightsaber that protects and defends it from harm!
• How does the I3DP Protection and Defense 2 Prong Galaxys Edge Lightsaber Wall Mount work?
It has two prongs that grip your lightsaber securely, so it can’t fall or be knocked over. Plus, the sleek design looks great on any wall!
• Why do you need the I3DP Protection and Defense 2 Prong Galaxys Edge Lightsaber Wall Mount?
If you don’t want your lightsaber to be damaged, this is the perfect way to keep it safe and sound. No more worrying about it getting knocked over or falling!
• Where can you buy the I3DP Protection and Defense 2 Prong Galaxys Edge Lightsaber Wall Mount?
You can purchase it through our website or through select retailers.
• How much does the I3DP Protection and Defense 2 Prong Galaxys Edge Lightsaber Wall Mount cost?
The I3DP Protection and Defense 2 Prong Galaxys Edge Lightsaber Wall Mount ret
Why We Like This
1. American made
2. 3D printed
3. Custom cutouts to support the 2 prong pommels from Glalaxys edge
4. Includes all hardware needed to mount on the wall
5. The original creator of the 3d printed lightsaber wall mount
Benefits of Galaxy’s Edge Lightsaber Wall Mount
A good lightsaber wall mount not only looks great, but can also be very practical. For one thing, it can help you keep your lightsaber handy and within reach. A wall mount also allows you to easily switch between different types of lightsabers and colors. And if you have a lot of sabers, a quality wall mount can help organize them nicely while on display.
There are many different designs of lightsaber wall mounts available, so finding one to suit your needs and taste should be easy.
Buying Guide for Best Galaxy’s Edge Lightsaber Wall Mount
When shopping for the best galaxy’s edge lightsaber wall mount, there are a few things to consider. First, you will want to make sure that the mount is compatible with your specific model of lightsaber. Secondly, you’ll want to decide if you want a display-only mount or one that also offers storage for your other Star Wars collectibles. Finally, you’ll need to decide on a budget.
Once you’ve considered all of these factors, it’s time to start shopping! Here are a few of the best galaxy’s edge lightsaber wall mounts available:
1. The Ultimate Lightsaber Wall Mount: This mount is compatible with nearly all models of lightsaber and offers both display and storage options. It’s also one of the most expensive options on this list.
2. saberhanger Lightsaber Wall Mount: This budget-friendly option is perfect for those who want to save some money but still get a quality product. It’s compatible with most lightsabers and offers both display and storage options.
3.”IKEA Lack” Floating Shelf: This simple and sleek shelf is a great option for those who want an elegant way to display their lightsaber collection without breaking the bank. However, it’s important to note that this shelf is not compatible with all models of lightsaber (specifically curved hilts).
Frequently Asked Question
What are the dimensions of the mount?
The mount is 12 inches wide and 24 inches long.
What is the max weight capacity of the mount?
The mount has a max weight capacity of 50 lbs.
What is the distance between the hilts on the mount?
A general rule of thumb is that the distance between the hilts should be around 10-12 inches apart.
Is the mount adjustable to accommodate different hilt sizes?
Yes, the mount is adjustable to accommodate different hilt sizes.
Is the paint job on the mount weathered or clean?
The paint job is weathered.
Conclusion
Thank you for your time! I hope I have convinced you that this is the best galaxy’s edge lightsaber wall mount on the market. For the price, it is truly a great value. It is made of high quality materials and looks great on any wall. If you are looking for a way to show off your collection, this is the perfect solution.
Leave a Reply